stainless steel coil/plate
stainless steel coil/plate
- SUS444, 1.4521 Stainless Steel Polished Plate
- SUS444 (1.4521) polished plate material is a typically 18% chromium based stainless steel with corrosion resistance as good as 1:4509 and better than 1:4003. It is characterized by good corrosion resi
- Read more »
- Grit Mirror 410S Martensitic Stainless Steel Coil
- Grit mirror 410S martensitic stainless steel coil is a low carbon, non-hardening version of Type 410 stainless steel. This low hardening characteristic helps to prevent cracking when the steel is weld
- Read more »
- JIS G4304 SUS304 HR Hot Rolled Stainless Steel Strips
- SUS304 material in JIS G4304 standard is hot rolled stainless steel. Available in plates, sheets and strips. JIS G4304 SUS304 HR stainless steel is a variation of the basic 18-8 grade, with a higher
- Read more »
- SUS316 Cold Rolled Stainless Steel Sheets to JIS G4305
- SUS316 stainless steel plates and sheets is supplied in cold rolled. SUS 316 cold rolled stainless steel is an austenitic chromium nickel stainless steel. JIS G4305 SUS316 stainless steel sheet is use
- Read more »
- Top Quality ASTM A516 Gr. 60 Pressure Vessel Plate
- ASTM A516 Gr. 60 Plates Equivalents: Grade HII in DIN 17155 standard BS1501-161-430A in British Standard Grade P265GH in EN10028 standard Top quality ASTM A516 Gr. 60 pressure vessel plates are suppli
- Read more »
- 304, 316 Austenitic Stainless Steel Plate Fabricator
- Alloy 304 and Alloy 316 are both austenitic family stainless steel. BEBON is a certified ISO 9001:2008 company, 304 and 316 austenitic stainless steel plate fabricator in China. Supply prime quality 3
- Read more »
- AISI 1020 Hot Rolled Plates
- AISI 1020 Hot Rolled Plates Chemical Composition (heat analysis, by mass % unless otherwise specified) Carbon (C): 0.170 0.230 Manganese (Mn): 0.300 0.600 Phosphorus (P): 0.040 max. Sulfur (S): 0.050
- Read more »
- SA516 Gr.70+N High Strength Plates
- SA516 Gr.70+N high strength plates refer to normalized steel plate product. For ASME SA516 Gr.70 steel plate and sheet thinner than 40mm we normally supply them as rolled-steel coil, the plates with t
- Read more »
- 630 Martensitic Stainless Steel Plates Stockist
- As a professional 630 martensitic stainless steel plate stockist, BEOBN will offer 630 martensitic stainless steel plates with thickness up to 60mm. We also offer 630 hot rolled stainless steel sheets
- Read more »
- ASTM A240 309/ UNS S30900 Stainless Steel 2B Surface Cold Rolled Sheet
- Stainless steel ASTM A240 309/ UNS S30900 sheet is available in 2B, 2D, Bright Annealed(BA), mirror, 8K or polished surface finish. ASTM A240 309 stainless steel cold rolled sheet is mainly used for p
- Read more »
- 904L Austenitic Stainless Steel Coils Characteristics
- Grade 904L is an austenitic stainless steel intended for use under severe corrosion conditions, with a very good resistance to attacks in acidic environment, as sulphuric, phosphoric and acetic acid.
- Read more »
- ASTM A709 Alloy Steel Plates for Bridges
- ASTM A709 high strength low alloy steel plate is ASTM certified structural steels for the bridges and construction industry. ASTM A709 bridge steel plates maintain a tensile yield strength of 50,000 p
- Read more »