Pruduct Category

Pruduct Processing

BEBON > Selling list > - E355+N/ ST 52.3 Tube Wall Thickness and ToleranceE355+N/ ST 52.3 Tube Wall Thickness and Tolerance

E355+N/ ST 52.3 Tube Wall Thickness and Tolerance

E355+N/ ST 52.3 tube surface hardness is 850 HV. E355+N/ ST 52.3 tube OD tolerance is accordning too ISO 286-2 (f7) ( double undersized). Below is the E355+N/ ST 52.3 tube wallo thickness and tolerance. Welcome to contact with us.

Wall Thickness (mm) (ID and ID tolerance listed in the center):

OD (mm)	OD tolerance (mm)	3	5	6	7.5	10	12.5	15
22	(-.020 /-.041 )	16 (+/-.15 )	12(+/-.35 )
25		19 (+/-.15 )	15(+/-.30 )	13(+/-.30 )	10(+/-.35 )
30		24 (+/-.15 )	20(+/-.15 )	18 (+-/-.30 )	15(+/-.30 )
35	(-.025 /-.050 )	29 (+/-.15 )	25(+/-.15 )	23(+/-.20 )	20(+/-.25 )
40		34 (+/-.15 )	30(+/-.15 )	28(+/-.15 )	25(+/-.25 )	20(+/-.30 )
45		39 (+/-.20 )	35(+/-.20 )	33(+/-.20 )	30(+/-.20 )	25(+/-.25 )
50		44 (+/-.20 )	40(+/-.20 )	38(+/-.20 )	35(+/-.20 )	30(+/-.20 )
55	(-.030 /-.060 )	49 (+/-.25 )	45(+/-.25 )	43(+/-.25 )	40(+/-.25 )	35(+/-.25 )	30(+/-.25 )
60		54 (+/-.25 )	50(+/-.25 )	48(+/-.25 )	45(+/-.25 )	40(+/-.25 )	35(+/-.25 )
63		57 (+/-.25 )	53(+/-.25 )	51(+/-.25 )	48(+/-.25 )	43(+/-.25 )	38(+/-.30 )
65		59 (+/-.30 )	55(+/-.30 )	53(+/-.30 )	50(+/-.30 )	45(+/-.30 )	40(+/-.30 )	35(+/-.30 )
70		64 (+/-.30 )	60(+/-.30 )	58(+/-30 )	55(+/-.30 )	50(+/-.30 )	45(+/-.30 )	40(+/-.30 )
80		74 (+/-.35 )	70(+/-.35 )	68(+/-.35 )	65(+/-.35 )	60(+/-.35 )	55(+/-.35 )	50(+/-.35 )
90	(-.036 /-.071 )	84 (+/-.40 )	80(+/-.40 )	78(+/-.40 )	75(+/-.40 )	70(+/-.40 )	65(+/-.40 )	60(+/-.40 )
100		94 (+/-.45 )	90(+/-.45 )	88(+/-.45 )	85(+/-.45 )	80(+/-.45 )	75(+/-.45 )	70(+/-.45 )
120		114 (+/-.50 )	110(+/-.50 )	108(+/-.50 )	105(+/-.50 )	100(+/-.50 )	95(+/-.50 )	90(+/-.50 )
140	(-.043 /-.083 )	134 (+/-.70 )	130(+/-.70 )	128(+/-.70 )	125(+/-.70 )	120(+/-.70 )	115(+/-.70 )	110(+/-.70 )