E-mail: [email protected] Hotline: 0086-371-86151527
SUS 410 Composition

SUS 410 Composition

Main Elements: Iron (Fe): As the main constituent element, the content accounts for at least 88%. Chromium (Cr): Chromium is an important alloying element in SU

Main Elements:
Iron (Fe): As the main constituent element, the content accounts for at least 88%.
Chromium (Cr): Chromium is an important alloying element in SUS 410, and its content is between 11.5% and 14.5%, which gives stainless steel excellent corrosion resistance.
Other alloying elements:
Carbon (C): The content is between 0.10% and 0.15%, which affects the hardness and strength of the steel.
Silicon (Si): The content does not exceed 1.0%, which has a certain effect on the mechanical properties of the steel.
Manganese (Mn): The content does not exceed 1.0%, which mainly affects the toughness and hardness of the steel.
Phosphorus (P): The content does not exceed 0.04%, and excessive phosphorus content may reduce the toughness of the steel.
Sulfur (S): The content does not exceed 0.03%, and excessive sulfur content may cause brittleness of the steel.
Copper (Cu): The content is between 1.50% and 2.50%, which may be used to improve certain specific properties, such as corrosion resistance.
Nickel (Ni)-free properties:
SUS 410 is a nickel-free stainless steel, which reduces its cost and makes it advantageous in certain applications.
Other information:
SUS 410 is a martensitic stainless steel with high hardness, wear resistance and good corrosion resistance.
It also has good hot strength and cold deformation properties, as well as good shock absorption.
When in use, avoid tempering between 370-560℃.

stainless steel processing

The manufacture of stainless steel involves a series of processes. First, the steel is melted, and then it is cast into solid form. After various forming steps, the steel is heat treated and then cleaned and polished to give it the desired finish. Next, it is packaged and sent to manufacturers, who weld and join the steel to produce the desired shapes.

Melting and Casting
Melting and Casting

The raw materials that constitute a stainless steel item are placed together and melted in a giant electric furnace. Intense heat is applied rigorously for a period of 8 to 12 hours during this step. Once the melting is complete, the molten steel is cast into desired semi-finished forms. Some of the most common forms or shapes include slabs, blooms (rectangular shapes), billets (these could either be round or square), rods, and tube rounds.

Forming
Forming

In the second stage, the semi-finished steel shapes undergo a series of forming operations. For instance, the stainless steel is hot rolled (heated and passed through enormous rolls). The blooms and billets mentioned above are converted to bar and wire. The slabs on the other hand are formed into plates, strips or sheets. It is very common to turn semi-finished steel shapes into bars, as it is the most versatile stainless steel form (it comes in all grades and sizes). You have round, square, octagonal, and hexagonal bars, each suitable for a different type of application.

Heat Treatment
Heat Treatment

The various stainless steel forms undergo a thorough annealing process during this step. Annealing is another name for heat treatment where the stainless steel is heated and cooled in a controlled environment. The purpose of this heat treatment is to relieve the pent-up stress inside the stainless steel and soften the material to make it more suitable for a wide variety of applications. The people in charge of carrying out the annealing process have to be very careful about the conditions as even the slightest of changes in the temperature, pressure, duration, or cooling rate could result in a faulty product.

Descaling
Descaling

During the annealing process, a certain amount of scale appears on the surface of the stainless steel. This scale can be removed using a number of different processes that are collectively known as descaling. Pickling is one of the more common methods of carrying out the descaling process.

Cutting
Cutting

The semi-finished, heat-treated, and descaled stainless steel forms are cut into specific shapes in this step. Mechanical cutting is performed with the aid of guillotine knives, blanking, nibbling, and high-speed blades.

Finishing
Finishing

Finishing is applied to help the stainless steel product achieve its signature aesthetically appealing appearance. Finishes are also needed to make the stainless steel product smooth and easier to clean, which is a top requirement in sanitary applications.

You can contact us through the following ways

If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Consulting online customer service

0086-371-86151527
[email protected]
TOP