305 stainless steel Chemistry,305 stainless steel supplier

Type 305 Stainless Strip Steel possesses the same excellent corrosion resistance as Type 302, but has a much lower rate of work hardening. It is well suited for cold forming operations in which this low rate of work hardening is desirable. Its yield, tensile strength, and hardness increase at rates which are exceptionally low. However, its initially good elongation falls off rapidly.

Type 305 stainless steel is widely used for the production of parts by free spinning and cold heading operations, and it is particularly suitable for severe cold drawing, especially where the part can be completely formed in two draws. In many instances, the intermediate anneal can be eliminated when Type 305 is used. In drawing, the metal should be allowed to slip freely through the hold-down pads, thus holding stretching to a minimum. Used widely for electronic parts and other drawn applications.

305 stainless steel Chemistry
C .12 Max.
Mn 2.00 Max.
Si .040 Max.
P .030 Max.
S .750 Max.
Cr 17.00/19.00
Ni 10.50/13.00

Applications:
Deep drawn or spun components, eyelets, electronic enclosure applications

as a 305 stainless steel supplier in China, if you want to buy 305 stainless steel or need more information about 305 stainless steel, you can contact us!